Kohler K-1278 Manuel d'instructions d'installation - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Kohler K-1278. Kohler K-1278 12 pages. Removable bath/ whirlpool aprons
Également pour Kohler K-1278 : Manuel d'installation (12 pages), Manuel d'installation (17 pages)
Imprimer la page
5.
Square frame to rim of bath/whirlpool.
6.
Secure sides of apron frame to studs with screws
provided. Shim if necessary to fill any gap(s).
7.
Secure bottom of apron frame to subfloor with
screws or floor anchors. Shim if necessary to fill any
gap. Some shimming (approximately 1/2" (1.3cm))
will be necessary if installing your apron on
K-1266/67 Dockside bath/whirlpool.
8.
Thread the carriage bolt out until it makes contact
with the bath. Then secure by threading the nut up
against backside of brace.
9.
Install apron panel by centering on apron frame.
Press panel onto frame so each of the fasteners
located on the backside are engaged.
10. Install wall covering and flooring. Maximum wall
thickness is 1-1/2" (3.8cm). Maximum floor
thickness is 2" (5cm).
REMOVE THE APRON
When servicing the unit, pry bottom of panel gently using
a flat-blade screwdriver.
Kohler Co.
Square
Apron Frame
Fastener
Apron Panel
Screwdriver
3
Carriage Bolt
Bath
Shim (if
necessary)
Subfloor
Screw
Apron Frame
Apron Panel
Apron Frame
1018323-2-
Stud
A