AEG LAVATHERM 55600 Informations sur l'utilisateur - Page 22
Parcourez en ligne ou téléchargez le pdf Informations sur l'utilisateur pour {nom_de_la_catégorie} AEG LAVATHERM 55600. AEG LAVATHERM 55600 32 pages. Condensation dryer
Imprimer la page
Programming options
Objective
Permanently program
in the audible signal
which reminds you that
the programme is com-
plete.
Adjust detection of de-
gree of drying:
If the laundry is slightly
drier or slightly damp-
er at the end of the
programme than with
the standard setting.
If the EMPTY WATER
(RESERVOIR) display is
to remain permanently
deactivated when us-
ing an external con-
densate drain.
22
1. Turn the programme selector to any programme.
2. Press the AUDIBLE SIGNAL (ZOEMER) button and hold
down for approx. 5 seconds.
A brief signal sounds several times. The AUDIBLE SIGNAL
(ZOEMER) display flashes several times.
The setting is permanently programmed.
The setting is cancelled as described under 1 and 2.
1. Turn the programme selector to any programme.
2. Press the SENSITIVE (BEHOEDZAAM) and START/PAUSE
(START/PAUZE) buttons at the same time and hold down
for approx. 5 seconds.
The current setting is displayed on the programme
progress display:
– END (EINDE) display: Setting for drier laundry
– COOLING (AFKOELEN) display: Standard setting
– DRYING (DROGEN) display: Setting for damper laundry
3. Press the START/PAUSE (START/PAUZE) button until the
setting required appears on the programme progress dis-
play.
4. Turn the programme selector to OFF (UIT).
The setting is permanently programmed.
1. Turn the programme selector to any programme.
2. Press the SPECIAL CARE (LAGE TEMP.) and AUDIBLE SIG-
NAL (ZOEMER) buttons at the same time and hold down
for approx. 5 seconds. The EMPTY WATER (RESERVOIR)
display flashes briefly.
The EMPTY WATER (RESERVOIR) display is permanently
deactivated.
Settings may be cancelled as under 1 and 2, but the EMPTY
WATER (RESERVOIR) display is briefly illuminated (instead of
flashing).
Implementation