AEG LAVATHERM 59800 Informations sur l'utilisateur - Page 25
Parcourez en ligne ou téléchargez le pdf Informations sur l'utilisateur pour {nom_de_la_catégorie} AEG LAVATHERM 59800. AEG LAVATHERM 59800 36 pages. Aeg condenser dryer with heat pump
Également pour AEG LAVATHERM 59800 : Informations sur l'utilisateur (32 pages)
Imprimer la page
Programming options
Objective
Permanently programme
in the audible signal
which reminds you that
the programme is com-
plete.
Adjust "level of dryness"
detection:
If the laundry is slightly
drier or slightly damper
at the end of the pro-
gramme than with the
standard setting.
To deactivate the EMPTY
WATER (RESERVOIR) dis-
play when using an ex-
ternal drain for the
condensed water.
Implementation
1. Turn the programme selector to any programme.
2. Press the SIGNAL (ZOEMER) button and hold down for
approx. 5 seconds.
A brief signal sounds several times. The SIGNAL (ZOEM-
ER) display flashes several times.
The setting is permanently programmed.
The setting is cancelled as described under 1 and 2.
1. Turn the programme selector to any programme.
2. Press the SILK (ZIJDE) and SIGNAL (ZOEMER) buttons at
the same time and hold down for approx. 5 seconds.
The current setting appears on the multi-display:
– C0: Setting for drier laundry
– C1: Standard setting
– C2: Setting for damper laundry
3. Press the START/PAUSE (START/PAUZE) button until the
setting required appears on the multi-display.
4. Turn the programme selector to OFF (UIT).
The setting is permanently programmed.
1. Turn the programme selector to any programme.
2. Press the WOOL (WOL) and LONG ANTICREASE (ANTI-
KREUK) buttons at the same time and hold down for ap-
prox. 5 seconds. The multi-display briefly displays "0"
The EMPTY WATER (RESERVOIR) display is permanently
deactivated.
The setting is cancelled as described under 1 and 2; the
multi-display however briefly displays "1" (rather than
"0").
25