AEG LAVATHERM 7041 TK ELECTRONIC Informations sur l'utilisateur - Page 26

Parcourez en ligne ou téléchargez le pdf Informations sur l'utilisateur pour {nom_de_la_catégorie} AEG LAVATHERM 7041 TK ELECTRONIC. AEG LAVATHERM 7041 TK ELECTRONIC 32 pages. Condensation dryer

Imprimer la page

1. Troubleshooting by Yourself

3. Remove foil hose and polystyrene

padding from the machine.

Electrical connection

Details on mains voltage, type of current and the fuses required should

be taken from the type plate. The type plate is fitted near the loading

aperture (see "Machine description" section).

Important:

The plug must be accessible after the appliance has been installed.

Changing door stop

Warning! The door stop may only be changed by a specialist.

If necessary, please contact our after-sales service or your specialist

dealer.

Warning! Before changing the

door stop, disconnect the mains

plug; with a permanent connec-

tion: fully unscrew or deactivate

the fuse.

Open loading door.

4. Unscrew hinge A from the front of

the machine and take off the load-

ing door.

5. Remove cover plates B and C. To do

this, insert a thin screwdriver into

the slots as shown in the illustra-

tion, press downwards slightly and

pry out the cover plates.

6. Use an appropriate tool and exert

pressure to unfasten locking block

D from the snap-on fixture, take

out and reinsert on the other side having rotated the block through

180°.