AEG LAVATHERM 8040 TW ELECTRONIC Informations sur l'utilisateur - Page 18

Parcourez en ligne ou téléchargez le pdf Informations sur l'utilisateur pour {nom_de_la_catégorie} AEG LAVATHERM 8040 TW ELECTRONIC. AEG LAVATHERM 8040 TW ELECTRONIC 32 pages. Condenser dryer with heat pump

Imprimer la page

1. Cleaning and Maintenance

Emptying the condensate tank

Empty condensate tank after every drying cycle.

If the condensate tank is full, an active programme will break off auto-

matically and the EMPTY WATER (BEHÄLTER) display will light up. In or-

der to continue the programme, the condensate tank must first be

emptied.

Warning! The condensate is not suitable for drinking or for preparing

foodstuffs.

1. Pull drawer containing condensate

tank out all the way (1). Pull out

condensate tank's outlet connec-

tions (2).

2. Pour condensate out into basin or

other suitable container.

3. Slide outlet connections in and re-

fit condensate tank.

If the programme has been inter-

rupted as a result of the conden-

sate tank being full:

Press the START/PAUSE button to

continue the drying cycle.

The condensate tank has a volume of approx. 4 litres. This is sufficient

for around 6kg of laundry which has previously been spun at 800 revo-

lutions/minute.

The condensate can be used as distilled water, e.g. for steam ironing.

However first filter the condensate (e.g. with a coffee filter) to remove

any residue and small pieces of fluff.

Cleaning the fluff filter

If the indicator CLEAN FILTER BASE (SIEB SOCKEL) lights up, the fluff

filter and the filter mat in the base of the appliance must be cleaned.

To protect the heat pump from dirt, the dryer is fitted with a special fil-

ter mat, which is located in the filter housing. Here too large amounts

of fluff build up over time, which affect the function of the appliance.