AEG LAVATHERM T56600 Informations sur l'utilisateur - Page 23

Parcourez en ligne ou téléchargez le pdf Informations sur l'utilisateur pour {nom_de_la_catégorie} AEG LAVATHERM T56600. AEG LAVATHERM T56600 33 pages. Condensation dryer

Imprimer la page

125983250.qxp

2006-03-21

Drying cycle lasts an

unusually long time.

Note:

After around 5 hours

the drying cycle ends

automatically (see

„Drying cycle complete").

Changing bulb for inside light

Only use a special bulb which is designed specially for dryers. The special bulb

is available from the after-sales service, ET-Nr. 112 552 000-5.

Warning! Do not use standard bulbs! These develop too much heat and

may damage the machine!

Warning! Before replacing the bulb, disconnect the mains plug; with a

permanent connection: fully unscrew or deactivate the fuse.

1. Unscrew covering bonnet from above bulb (this can be found directly behind

the loading aperture, at the top; refer to "Description of machine" section.)

2. Replace defective bulb.

3. Screw covering bonnet back down.

Warning! For reasons associated with safety, the covering bonnet must

be screwed down tightly. If this is not done, the dryer must not be operated.

11:11

Page 23

Problem

Possible cause

Lint filter clogged.

Heat exchanger clogged

with lint.

SPECIAL CARE (LAGE TEMP.)

button pressed and load

volume too big.

Load volume too big.

Laundry insufficiently pre-

drained.

Remedy

Clean lint filter.

Clean heat exchanger.

SPECIAL CARE (LAGE TEMP.)

is only suitable for use with

loads of up to 3 kg!

Reduce load volume.

Laundry must be adequately

pre-drained.