AEG TR834E94E Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG TR834E94E. AEG TR834E94E 32 pages.

• Connect the mains plug to the mains socket only at the end

of the installation process. Make sure that the mains plug is

accessible after installation.

• Ensure good air ventilation in the room where the appliance

is installed to avoid the backflow of unwanted gases into the

room from appliances burning gas or other fuels, including

open fires.

• WARNING: Do not install the appliance in an environment

with no air exchange.

The appliance contains flammable gas, propane (R290), a

gas with a high level of environmental compatibility. Keep

fire and ignition sources away from the appliance. Be

careful not to cause damage to the refrigerant circuit

containing propane.

• WARNING: In the appliance enclosure or in the built -in

structure, keep ventilation opening clear of obstruction.

• WARNING: Do not damage the refrigerant circuit.

• If the mains power supply cable is damaged, it must be

replaced by the manufacturer, its Authorised Service Centre

or similarly qualified persons to avoid an electrical hazard.

• Do not exceed the maximum load of 9,0 kg (refer to the

"Programme chart" chapter).

• Wipe away lint or packaging debris that has accumulated

around the appliance.

• Do not run the appliance without a filter. Clean the lint filter

before or after each use.

• Do not dry unwashed items in the tumble dryer.

• Items that have been soiled with substances such as

cooking oil, acetone, alcohol, petrol, kerosene, spot

removers, turpentine, waxes and wax removers should be

washed in hot water with an extra amount of detergent

before being dried in the tumble dryer.

• Items such as foam rubber (latex foam), shower caps,

waterproof textiles, rubber backed articles and clothes or

pillows fitted with foam rubber pads should not be dried in

the tumble dryer.

ENGLISH