Kohler EVOK 2.0 25166A-0 Instructions d'installation - Page 3

Parcourez en ligne ou téléchargez le pdf Instructions d'installation pour {nom_de_la_catégorie} Kohler EVOK 2.0 25166A-0. Kohler EVOK 2.0 25166A-0 5 pages. Seamless freestanding baths

Imprimer la page

INSTALLATION REQUIREMENTS

A. Tools Required

Adjustable pipe

wrench

Ruler

Level

Safety shoes

Safety glasses

Square

Screwdriver

Pliers

Utility knife

C. Installation Note:

Read the entire installation instruction manual supplied with this bath before beginning the installation. If installing

a rim-mount faucet, make sure there is no interference with the drain overflow before drilling any holes.

D. Clearance Requirements

Check the rough-in and room dimensions to ensure there is adequate available space for the bath.

SITE REQUIREMENTS

Subfloor

Preparation

Check the flooring under the bath, and make repairs as necessary. Make sure the subfloor is level. It is strongly

recommended to prepare a waterproof layer for the subfloor beforehand. It may be necessary to plan for a

channel in the floor to allow space for a trap, see cross section below:

BEFORE INSTALLING UNIT

A. Protect the Bath Unit

Position a protective covering underneath the bath and be careful not to scratch the bath surface.

NOTES:

1. Flush the water supply pipes thoroughly to remove debris.

2. Inspect the supply tubing for damage. Replace as necessary.

3. Observe local plumbing codes.

B. Materials Required

Plumbers putty

Wall coverings(as necessary)

Silicone sealant