Kohler Windward K-1112-GF Manuel d'installation - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Kohler Windward K-1112-GF. Kohler Windward K-1112-GF 4 pages. Bath with airjets
Imprimer la page
No change in measurements if connected with
drain illustrated. (K-11677 or K-11677M)
Recommended faucet area
1-1/4"
(3.2 cm)
Tile Flange
Detail
42" (106.7 cm)
1-1/2" OD
Product Information
Applicable product:
Drop-in rim style
Drop-in, 4-side integral flange
Drop-in cutout dimensions:
58-1/2" (148.6 cm) x 40-1/2 (102.9 cm)
Fixture*:
Bathing well
Basin area
43" (109.2 cm) x 24-5/8" (62.5 cm)
bottom
Basin area top
53-1/2" (135.9 cm) x 32-1/8" (81.6 cm)
Weight
110 lbs (50 kg)
To overflow
Water depth
15" (38.1 cm)
Capacity
57 gal (215.9 L)
* Approximate measurements for comparison only.
Blower motor:
Heater
1 Hp
300 W
Minimum access panel/pump control:
20" (50.8 cm) W x 15" (38.1 cm) H
1076046-1-A
1-1/2"
(3.8 cm)
Drop-In Rim
Detail
Blower/Control Access
20" (50.8 cm) W x
15" (38.1 cm) H Min
1-1/2"
(3.8 cm)
19-1/2"
(49.5 cm)
K-1112-G
shown
K-1112-GF
not shown
V
Hz
120
60
60" (152.4 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
Blower motor is supplied with a 24" (61 cm) grounding-type
plug-in cord.
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
35 lbs/square foot (171 kg/square meter) loading.
If installing a rim-mount faucet, make sure there is no interference
with the drain overflow and circulating system before drilling any
holes. Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
A
5
required
2
21"
(53.3 cm)
3-1/8"
(7.9 cm)
10-13/16"
(27.5 cm)
3-1/2"
(8.9 cm)
1" (2.5 cm) from
the Floor to the
Bottom of the Drain
120 V, 5 A, 60 Hz
Kohler Co.