Kohler C3-520 Manuel d'installation - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Kohler C3-520. Kohler C3-520 17 pages. Smart seat
Également pour Kohler C3-520 : Manuel du propriétaire (41 pages), Manuel d'installation (33 pages), Manuel d'installation (17 pages)

Kohler C3-520 Manuel d'installation
1. Toilet roughing-in requirements and installation tips
2
3
5
1. Distance between installation holes: 136 - 210mm.
2. Distance between installation holes and tank front rim: >20mm.
3. Distance between installation holes and bowl inner rim: <70mm.
4. Distance between installation holes and tank top rim: 460 - 490mm.
5. Bowl inner diameter: 370 - 390mm.
6. The distance between the seat and the plug should be maximum 1 meter.
2. Install an Electrical Outlet
WARNING: Risk of electric shock, fire, or personal injury.
This product must be grounded. Connect only to a dedicated
220V~, 60Hz, 10A circuit protected by Ground-Fault Circuit-
Interrupter (GFCI) or Earth-Leakage Circuit-Breaker (ELCB).
It is recommended to use water-resistant socket. Do not use an extension cord
with the product.
NOTE: Follow local codes when determining the electrical outlet location.
Route the electrical and install to a 220V~, 60Hz, 10A GFCI- or ELCB-protected
receptacle.
3. Preparation
Turn off the water supply to the toilet.
Flush the toilet to relieve any pressure from the water supply hoses.
Place a container under the inlet valve to catch any residual water.
Disconnect the water supply hose from the inlet valve.
Remove the existing toilet seat.
1350324-KR01-A
1
4
4
Kohler Co.