Kohler CABERNET WATER-GUARD K-3408 Manuel d'instructions d'installation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Kohler CABERNET WATER-GUARD K-3408. Kohler CABERNET WATER-GUARD K-3408 8 pages. Vitreous china siphon vortex toilet

Imprimer la page

TROUBLESHOOTING

SYMPTOMS

Poor flush.

Poor rim wash.

Valve does not shut off, and water is

flowing into the overflow. If after

tank is filled to water level line,

supply stop is turned off and water

level drops.

Valve does not shut off and water is

flowing into the overflow.

Bowl seal does not recover.

112037-2-

(A)

PROBABLE CAUSES

A. Low tank water level.

B. Supply stop not fully open.

C. Low bowl water level.

D. Water pressure is below 25 p.s.i.

A. Same as A., B., C., D. for poor

flush.

A. Defective flush valve flapper.

A. High water level in tank.

B. Leaky float ball.

C. Leaky float valve seat.

A. Seal screw needs adjusting.

CORRECTIVE ACTION

A. Check water level in tank, adjust

per start-up instructions.

B. Fully open supply stop.

C. Adjust per start-up instructions.

D. Increase running water pressure.

A. Same as A., B., C., D. for poor

flush.

A. Replace flapper.

A. Adjust water level as per start-up

instructions.

B. Replace float ball.

C. Replace seat washer.

A. Adjust seal screw per start-up

instructions.

NOTE: May be caused by tempo-

rarily reduced water pressure.

Kohler Co., Kohler, WI