Kohler EIR K-77800T-0 Manuel d'installation - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Kohler EIR K-77800T-0. Kohler EIR K-77800T-0 43 pages. Eir intelligent toilet (wt2,hs) p trap, eir intelligent toilet (wt2,hs) p trapex
Également pour Kohler EIR K-77800T-0 : Manuel du propriétaire (44 pages)
Imprimer la page
Wall Water Outlet Installation
Note: If a new toilet is not installed immediately, temporarily stuff a rag in drain hole.
DANGER: Risk of electric shock. Disconnect power supply before servicing.
NOTE: This product is designed to work with wall mounted electrical and water supplies as shown in the
mounting dimensions.
WARNING: Risk of electric shock. Connect only to circuits protected by Ground-Fault Circuit-Interrupters (GFCI's)
or Earth-Leakage Circuit-Breakers (ELCB's).
C. 1. Confirm the drain hole center and mark down the "+" centerline perpendicular to the floor and
finished wall.
2.
Mark center for width direction on toilet.
3.
Measure drain hole center to floor height H.
4.
Dismantle toilet side panel, place on the protection rag, rotate nut as shown; adjust toilet
discharge pipe to floor height so to match drain hole height on the wall.
5.
Align and toilet to floor and wall centerline and against the wall naturally, mark left and right
anchor bolt hole position H.
Kohler Co.
Mounting holes (2)
H
11
1357244-T01-E