Kohler K-10611T-VLSL Instructions d'installation - Page 7

Parcourez en ligne ou téléchargez le pdf Instructions d'installation pour {nom_de_la_catégorie} Kohler K-10611T-VLSL. Kohler K-10611T-VLSL 27 pages. Floor standing toilet

4. Adjust the distance between centerline of PVC waste pipe
and the floor (wall) to match it consistent with marked
roughing-in.
Back
Installation
185
5. Move the toilet to the field and make sure the bottom
profile matches marked line on the ground.
6. Install the threaded rods through
the seat holes in the bowl. Tighten
bolts with hex wrench. Making sure
that they install correctly in the
holes in the floor.
It is suggested to use other auxillary
light such as torch to eluminate one
preserved installation hole of the
toilet. Watch the movement of the
threaded rod through the other
installation hole to better control the
installation process.
NOTE: Do not use white cement or
high lime content cements to install
this toilet. The expansion of cement
due to a rise in temperature may
make the toilet crack or cause
damage. Kohler is not responsible
for any damage caused by
installation with the use of cement.
1332802-T01-E
4.
Back
Installation
Finished
Floor
155
Fig.#5
5
5.
Fig.#6
6
-7-
PVC
UNIT mm
Finished
Floor
6.