Kohler Command PRO CH730 Manuel du propriétaire - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Kohler Command PRO CH730. Kohler Command PRO CH730 12 pages. Liquefi ed petroleum gas (lpg) or lpg/natural gas (ng) fueled
Également pour Kohler Command PRO CH730 : Manuel du propriétaire (21 pages), Manuel du propriétaire (21 pages), Manuel du propriétaire (8 pages), Manuel du propriétaire (21 pages), Manuel du propriétaire (21 pages), Manuel du propriétaire (14 pages), Manuel du propriétaire (8 pages)

Imprimer la page

Kohler Command PRO CH730 Manuel du propriétaire

Oil Cooler (if equipped)

1. Clean ﬁ ns with a brush or compressed air.

2. Remove two screws securing oil cooler, and

tilt to clean back side.

3. Reinstall oil cooler.

Air Cooling

Hot Parts can cause severe

burns.

Do not touch engine while

operating or just after stopping.

Never operate engine with heat shields or

guards removed.

Proper cooling is essential. To prevent over

heating, clean screens, cooling ﬁ ns, and other

external surfaces of engine. Avoid spraying

water at wiring harness or any electrical

components. See Maintenance Schedule.

Repairs/Service Parts

We recommend that you use a Kohler

authorized dealer for all maintenance,

service, and replacement parts for engine.

To ﬁ nd a Kohler authorized dealer visit

KohlerEngines.com or call 1-800-544-2444

(U.S. and Canada).

24 590 48 Rev. --

WARNING

KohlerEngines.com

Leakage Check/Testing

With fuel valve fully opened, engine not

running, turn key switch ON. Check all fuel

system connections and lines for leaks using

soapy water. Any leakage must be corrected

before restarting engine. Have service

performed by a Kohler authorized dealer or

qualiﬁ ed LPG/NG personnel only.

Storage

If engine will be out of service for 2 months or

more follow procedure below.

1. Change oil while engine is still warm from

operation. Remove spark plug(s) and pour

about 1 oz. of engine oil into cylinder(s).

Replace spark plug(s) and crank engine

slowly to distribute oil.

2. Disconnect negative (-) battery cable.

3. Separate LPG tank from unit and store

separately in an area designated for safe

LPG tank storage.

4. Store engine in a clean, dry place.