Kohler Command Pro CV940 Manuel du propriétaire - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Kohler Command Pro CV940. Kohler Command Pro CV940 21 pages. Vertical
Également pour Kohler Command Pro CV940 : Manuel du propriétaire (8 pages)

Kohler Command Pro CV940 Manuel du propriétaire
Oil Fill/Dipstick
Oil Filter
Electric
Starter
Oil Drain Plug
Figure 1. Typical Command PRO Vertical Shaft Engine.

Oil Recommendations

Using the proper type, weight, and a consistent brand
of oil in the crankcase is extremely important. So is
checking oil daily and changing oil regularly. Failure
to use the correct oil, or using dirty oil, causes
premature engine wear and failure.
Oil Type
Use high quality detergent oil of API (American
Petroleum Institute) service class SJ or higher. Select
the viscosity based on the air temperature at the time
of operation as shown in the following table.
R E C O M M E N D E D S A E V I S C O S I T Y G R A D E S
**
*
5W-20, 5W-30
°F -20
0
20
32
°C -30
-20
-10
0
TEMPERATURE RANGE EXPECTED BEFORE NEXT OIL CHANGE
* Use of synthetic oil having 5W-20 or 5W-30 rating is acceptable,
up to 4°C (40°F)
** Synthetic oils will provide better starting in extreme cold below
23°C (-10°F)
Figure 2. Viscosity Grades Table.
NOTE: Using other than service class SJ or higher oil
or extending oil change intervals longer than
recommended can cause engine damage.
4
Carburetor
Optional Muffler
10W-30
Kohler 10W-30
40
60
80
100
10
20
30
40
Air Cleaner
NOTE: Synthetic oils meeting the listed
classifications may be used with oil changes
performed at the recommended intervals.
However to allow piston rings to properly
seat, a new or rebuilt engine should be
operated for at least 50 hours using standard
petroleum based oil before switching to
synthetic oil.
A logo or symbol on oil containers identifies the API
service class and SAE viscosity grade. See Figure 3.
Figure 3. Oil Container Logo.
Refer to Maintenance Instructions beginning on page
8 for detailed oil check, oil change, and oil filter change
procedures.
Blower
Housing
Cylinder Shrouds
Spark
Plug