Kohler 10ERG Manuel d'utilisation - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Kohler 10ERG. Kohler 10ERG 48 pages. Commercial mobile generator set
Imprimer la page
Tightening the hardware.
projectiles can cause severe injury
or death. Loose hardware can cause
the hardware or pulley to release from
the generator set engine and can cause
personal
injury.
Retorque
crankshaft and rotor hardware after
servicing. Do not loosen the crankshaft
hardware or rotor thrubolt when making
adjustments or servicing the generator
set. Rotate the crankshaft manually in
a clockwise direction only. Turning the
crankshaft
bolt
or
rotor
counterclockwise
can
loosen
hardware.
Servicing the generator set when it
is operating. Exposed moving parts
can cause severe injury or death.
Keep hands, feet, hair, clothing, and
test leads away from the belts and
pulleys when the generator set is
running. Replace guards, screens, and
covers before operating the generator
set.
Notice
NOTICE
Voltage reconnection. Affix a notice
to the generator set after reconnecting
the set to a voltage different from the
voltage on the nameplate.
voltage reconnection decal 246242
from
an
authorized
distributor/dealer.
NOTICE
Hardware damage. The engine and
generator set may use both American
Standard and metric hardware. Use
the correct size tools to prevent
rounding of the bolt heads and nuts.
NOTICE
When replacing hardware, do not
substitute
with
inferior
hardware.
Screws and nuts are
available in different hardness ratings.
To
indicate
hardness,
Standard hardware uses a series of
markings, and metric hardware uses a
numeric system. Check the markings
on the bolt heads and nuts for
identification.
TP-6334
9/04
Flying
Canadian installations only.
standby service connect the output of
the generator set to a suitably rated
transfer switch in accordance with
all
Canadian Electrical Code, Part 1.
Electrostatic discharge damage.
Electrostatic
damages electronic circuit boards.
Prevent
thrubolt
damage by wearing an approved
the
grounding wrist strap when handling
electronic circuit boards or integrated
circuits. An approved grounding wrist
strap provides a high resistance (about
1 megohm), not a direct short, to
ground.
This generator set does not comply
with United States Coast Guard
(USCG) requirements and must not
be used for marine applications. For
marine installations use only generator
sets specified for marine use. USCG
Regulation 33CFR183 requires that a
generator
protected
gasoline-fueled environment.
Order
service
grade
American
NOTICE
For
NOTICE
discharge
(ESD)
electrostatic
discharge
NOTICE
set
must
be
ignition
when
used
in
a
Safety Precautions and Instructions V