Kohler 15EORZDB Fonctionnement - Page 7
Parcourez en ligne ou téléchargez le pdf Fonctionnement pour {nom_de_la_catégorie} Kohler 15EORZDB. Kohler 15EORZDB 48 pages. Commercial/recreational mobile generator sets
![Kohler 15EORZDB Fonctionnement](/uploads/products/server2/2653894/2653894.png)
CAUTION
Welding the generator set.
Can
cause
severe
equipment damage.
Never weld components of the
generator
set
without
disconnecting the battery, controller
wiring harness, and engine electronic
control module (ECM).
Servicing the generator set when it
is operating. Exposed moving parts
can cause severe injury or death.
Keep hands, feet, hair, clothing, and
test leads away from the belts and
pulleys when the generator set is
running. Replace guards, screens, and
covers before operating the generator
set.
Grounding
electrical equipment.
Hazardous
voltage
can
severe injury or death. Electrocution
is possible whenever electricity is
present. Ensure you comply with all
applicable
codes
and
Electrically ground the generator set,
transfer switch, and related equipment
and electrical circuits. Turn off the main
circuit breakers of all power sources
before servicing the equipment. Never
contact electrical leads or appliances
when standing in water or on wet
ground because these conditions
increase the risk of electrocution.
Welding on the generator set. Can
cause severe electrical equipment
damage.
Before welding on the
generator set perform the following
steps: (1) Remove the battery cables,
negative (--) lead first. (2) Disconnect
all engine electronic control module
(ECM) connectors. (3) Disconnect all
generator set controller and voltage
regulator circuit board connectors.
(4) Disconnect the engine battery-
charging
alternator
connections.
(5) Attach the weld ground connection
close to the weld location.
TP-6551 2/14
Short
voltage/current can cause severe
injury or death. Short circuits can
cause bodily injury and/or equipment
damage.
connections with tools or jewelry while
making
Remove all jewelry before servicing the
equipment.
electrical
Engine block heater.
voltage can cause severe injury or
death. The engine block heater can
first
cause electrical shock. Remove the
engine block heater plug from the
electrical outlet before working on the
block heater electrical connections.
Electrical backfeed to the utility.
Hazardous backfeed voltage can
cause
severe
Connect the generator set to the
building/campground electrical system
only through an approved device and
after the building/campground main
switch is turned off.
connections can cause severe injury or
death to utility personnel working on
power lines and/or personnel near the
cause
work area. Some states and localities
prohibit unauthorized connection to the
utility electrical system.
transfer
standards.
interconnection of the generator set
power and other sources of power.
Hot Parts
Hot coolant and steam.
Can cause severe injury or death.
Before removing the pressure cap,
stop the generator set and allow it to
cool. Then loosen the pressure cap
to relieve pressure.
Combustible materials.
cause severe injury or death. A hot
exhaust system can ignite adjacent
combustible materials. Do not locate
electrical
combustible
exhaust muffler.
when parking your vehicle to prevent
the exhaust system and hot exhaust
gases from starting grass fires.
circuits.
Hazardous
Do not contact electrical
adjustments
or
repairs.
Hazardous
injury
or
death.
Backfeed
Install a
switch
to
prevent
WARNING
Fire can
wiring,
fuel
lines,
materials
above
the
Exercise caution
Combustible materials.
cause severe injury or death. A hot
generator set can ignite debris in the
compartment. Keep the compartment
and generator set clean and free of
debris and combustible materials to
minimize the possibility of fire. Do not
block the fuel/oil drain opening in the
generator set mounting tray.
corresponding hole in the subfloor, if
used, for the drain opening.
Notice
NOTICE
Canadian installations only.
standby service connect the output of
the generator set to a suitably rated
transfer switch in accordance with
Canadian Electrical Code, Part 1.
NOTICE
This generator set does not comply
with United States Coast Guard
(USCG) requirements and must not
be used for marine applications. For
marine installations use only generator
sets specified for marine use. USCG
Regulation 33CFR183 requires that a
generator
set
must
protected
when
gasoline-fueled environment.
NOTICE
Saltwater damage. Saltwater quickly
deteriorates metals. Wipe up saltwater
on and around the generator set and
remove salt deposits from metal
surfaces.
or
Safety Precautions and Instructions
Fire can
Cut a
For
be
ignition
used
in
a
7