Kohler 2451 Manuel d'installation et d'utilisation - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Kohler 2451. Kohler 2451 24 pages. Vanity cabinets and mirrors
Imprimer la page
Note! Make sure that the drawer has been removed before turning the
vanity cabinet over. Refer to the section Remove and Adjust the Drawer
for more details.
1.
Turn the vanity cabinet over so that the bottom faces up.
Note! The legs must be installed opposite one another. Begin with the back
left corner, then to the front right corner.
2.
Insert a screw and washer through the hole in the back left leg, then
through the pre-drilled outer hole on the back left corner.
3.
Tighten the screw until there is no movement of the leg.
4.
Install the front right leg to the front right corner in the same manner.
5.
Insert the shelf into the groove of each installed leg.
6.
Install the two remaining legs in the same manner making sure that
the shelf is positioned into the groove in each leg before securing the
legs in position.
7.
Secure an L-bracket at each leg location, as illustrated.
8.
Turn the vanity cabinet back onto its legs and refit the drawer.
6
1067217-W2-B