Kohler 2452 Manuel d'installation et d'utilisation - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Kohler 2452. Kohler 2452 24 pages. Vanity cabinets and mirrors
Imprimer la page
4.
Open and close the door to confirm smooth operation. Adjust the
screws on the hinge assembly as needed.
Adjustment
5.
Height - to move the door up or down -Turn the screw either way
on the bottom and top hinge assembly until correct adjustment is
achieved.
6.
Side - to move the door to the left or right -Turn the screw either
way on the bottom and top hinge assembly until correct adjustment is
achieved.
7.
Depth - to move the door in or out -Loosen the screw on the bottom
and top hinge assembly, hold the door in the desired position, then
retighten the screws.
Remove/Replace the Hinges
Side of Vanity
Removal
1.
For a bottom hinge - Remove the cover plate from the hinge base
by sliding the cover plate out towards you, then away from the hinge
base.
2.
For a top hinge - Refer to the section "Remove/Adjust the Quiet Close
Assembly" then proceed with the removal procedure for both hinges.
Top of Door
Bracket
Latch
Hinge Base
Hinge Cup
Slot
Tab
11
Cover Plate
1067217-140
1067217-W2-B