Kohler ELOSIS Series Manuel d'instructions d'installation - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Kohler ELOSIS Series. Kohler ELOSIS Series 14 pages. Mirror cabinet
Imprimer la page
B. Install screws through holes in cabinet as shown in Fig.1
Note:
DO NOT OVER- TIGHTEN!
Use #8 x 1 1/2 Phillips head.
2. Surface mounting the cabinet on a wall.
NOTE:
Installing the cabinet on a wall without the door attached can
make installing easier for one person. Do not mount the doors
until the boxes is in or on the wall.
A. Install Mounting Bar.
you have, see below.)
1) For Single Door
Drill two 3/16 holes in bottom mounting bar at indent location.
Use the supplied anchors or locate studs if possible.
1056564-T01-A
Cabinet flange fits flush against wall
(Step one varies on type of cabinet
14 1/4 W for K-15030T-NA Models
19 1/4 W for K-15031T-NA,
K-15034T-NA,
K-15035T-NA Models
24 1/4 W for K-15032T-NA Models
29 1/4 W for K-15033T-NA
CL15
362
CL20
489
CL25
616
CL30 CL3026-3
Mounting location for
#8 x 1 1/2 philips
head screws
#8
Fig. 1
1
B.
1
#8
Top View
Install dome caps over screws
Fig. 2
2
2.
A.
(
1)
5
-4-
;
;
;
743
;
Stud and wall surface
)