Kohler K-2452 Manuel du propriétaire - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Kohler K-2452. Kohler K-2452 40 pages. Vanity

Top of Door

Side of Vanity

Bracket

Latch

Hinge Base

Adjustments

Side

Remove/Adjust the Door(s) and Hinges

Door(s)

Removal:

Hold the door in place with one hand while releasing the latch

from the bracket at each hinge assembly location on the door. The

door will detach from the hinges. Set the door aside.

If applicable, remove the remaining door in the same manner.

Replacement/Reinstallation:

Line up the latch pin on the hinge cup with the groove on the

hinge base, then snap into place.

Open and close the door to conﬁrm smooth operation. Adjust the

screws on the hinge assembly as needed.

Adjustment:

NOTE: Refer to the hinge assembly illustration above to select the

screw that corresponds to the adjustment needed.

Height - to move the door up or down - Turn the screw either

way on the bottom and top hinge assembly until proper

adjustment is achieved.

Side - to move the door to the left or to the right - Turn the

screw (speciﬁed in the illustration) either way on the assembly

until proper adjustment is achieved.

1049900-5-D

Hinge Cup

Slot

Cover Plate

Tab

Depth

Height

Kohler Co.