A-T Controls TRIAC TDC-100B Manuel d'installation et d'utilisation - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} A-T Controls TRIAC TDC-100B. A-T Controls TRIAC TDC-100B 14 pages. Ac digital high-resolution controller

Imprimer la page

The TDC-100 is rated for motors with up to 5A running

currents and comes in three versions to accommodate

different voltage applications. The TDC-100 is rated for

117 VAC 10%; the TDC-100A is rated for 234 VAC

10%, and the TDC-100B is rated for 24 VAC 10%. The

unit is easily mounted with 2 screws and is equipped with

removable screw terminals that provide for easy field

wiring. The unit's size, mounting, and screw terminals are

compatible with the AMC-100, AMC-101 and LRC-101

series controllers - the TDC-100 can be used as a direct

replacement for those units in nearly any application.

The simple three button control (MODE, ▲, and ▼)

allows the user to perform a complete set-up from the

unit itself without the need for any instrumentation. The

www.a-tcontrols.com



BLOCK DIAGRAM

DESCRIPTION

adaptive control feature of the TDC-100 eliminates the

need for any calibration steps. In the simplest

application, only the closed and open positions need to

be set and the unit automatically and continuously sets

all other parameters when placed in the AUTO mode.

CAUTION ! These units are intended to be mounted in

an appropriate enclosure to avoid electrical shocks and

exposure to electrostatic charges. High voltages are

present on the outside of the unit when power is applied.

should be disconnected and antistatic

AC power

measures should be taken prior to any wiring of

these units. A heater and thermostat should be

used where condensation may occur.

TDC-100 Series

AC Digital High-Resolution Controller

Installation & Maintenance Manual

IOM08032 REVISION 01

07/24/20