acaia Pearl S Manuel de l'utilisateur - Page 18
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} acaia Pearl S. acaia Pearl S 20 pages. Coffee scale
Également pour acaia Pearl S : Manuel de l'utilisateur (18 pages), Manuel de l'utilisateur (20 pages)
Imprimer la page
LED Indicators
Battery charge
Tare operation
Battery charge/Charge error
The orange indicator on the upper left turns on when the battery is charging and turns off
when the battery is fully charged. The indicator starts flashing or does not appear when the
USB cable is not working.
Tare operation
The orange indicator on the lower left turns on when the Tare button is pressed.
Ounce indicator
The green indicator on the upper right turns on when the weight is measured in ounces.
Espresso Mode indicator
The green indicator on the lower right turns on when in Espresso Mode.
Error Codes
Error Code
Description
Access Code Error, unrecognized access code.
Error 100
EEPROM error, unable to access memory. Please contact Acaia support.
Error 101
AD error, unable to access weighing signal. Please contact Acaia support.
Error 102
Unable to find acceptable starting Zero point, most likely because the loadcell
Error 303
has been damaged by excessive force or drop. Please contact Acaia support.
Maximum
Overload: the weight is over the maximum capacity.
Underload: the weight is under the minimum capacity.
Underload
Calibration error. Calibration cannot proceed when environmental noises are
Error 304
too strong. Please calibrate in a stable environment free of wind, vibration, etc.
Unable to tare because the weight exceeds the acceptable tare range.
Error 802
Unable to tare because the weight is unstable.
Error 803
Other
Display Code Description
The scale is in update mode. During the update process, the green LED on
the lower right will blink until the process is complete.
UPDATE
Note: If you want to leave update mode, please connect the scale's USB to a
power source.
Ounce indicator
Espresso Mode indicator
18