2N Telekomunikace SingleTalk Manuel d'installation - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} 2N Telekomunikace SingleTalk. 2N Telekomunikace SingleTalk 12 pages. Voice alarm station
Imprimer la page
Mounting
®
Remove the connectors on the ALARM inversion and programming jumpers on 2N
®
Lift1/ 2N
SingleTalk
. Use the 4 screws to loosen and move downwards the audio
unit. Disconnect the speaker and (external) microphone.
Connect the cable connectors included in the delivery to the microphone and speaker
®
®
connectors on
2N
Lift1
/ 2N
SingleTalk
(the microphone and speaker connectors
have different sizes and cannot be interchanged due to the audio unit cover
pictograms). Replace the audio unit cover, move it upwards and tighten the 4 screws.
Put the 6-pin connector on the ALARM inversion and programming jumpers (see the
figure below).