Aqara Hub M2 Manuel de démarrage rapide - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Aqara Hub M2. Aqara Hub M2 13 pages.

Wait for the yellow/red hub indicator light to change from always on to flashing.

Make sure that the mobile phone is connected with the 2.4GHz Wi-Fi network.

If you use a dual-band router, please make sure your phone is connected with 2.4GHz Wi-Fi or disable 5GHz Wi-Fi.

Keep your phone close to the hub and make sure both of them are connected with the same Wi-Fi network.

Please open the Aqara Home app, click "+" in the upper right corner, select "Hub M2" and

follow the instructions to complete adding the hub.

* For iOS users, if you want to realize Apple HomeKit control, please scan or manually enter the HomeKit Setup

If you fail to add the hub, please press the button on the hub for more than 10 seconds until

the yellow/red light flashes quickly, and then add it again. If you need any help, please

contact www.aqara.com/en/support.html.

Wi-Fi name or password may contain special characters. Please replace them with ordinary characters and try

again.

Please check whether the router turns on the Wi-Fi connection watcher function, which causes network

connection failures.

Please check whether the router turns on the AP isolation function, which causes the phone to not be able to

search for the hub within the LAN.

It is recommended not to connect it to a bridge network.