Dexin RX28-1M Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Dexin RX28-1M. Dexin RX28-1M 8 pages. Wireless 3 buttons optical mouse

Imprimer la page

Synchronize the RF Mouse (Pairing)

If the mouse is in sleep mode click the mouse button once to wake it up.

1. Bring the mouse within 1 ft range from the receiver.

2. Power on the mouse.

3. Hold the mouse upside-down and use a pointed object, such as a pen tip, to click the

CONNECT button (ID button) once.

4. Click the receiver's connect button once, within 5 seconds after clicking the connect

button on the mouse. The LED will start blinking, when the connection is established.

Move the mouse around to test if it was successful.

5. If the synchronization is not successful for some reason please

Remove the batteries and unplug the receivers

Wait for 20 sec then to try the step 1 to 4 again

Note: * During normal use, please make sure that the mouse is no more than 3 ft away from the receiver

in order to have reliable connection.

** The LED on the receiver will light up or blink while the mouse is being used

Operation Guide

BATTERY LOW INDICATION

When battery voltage level goes under the preset level, the receiver LED will blink

frequency. Although the mouse can still work for a while, the user, at this time, should have a

new set of batteries ready for replacement as soon as possible.

POWER ON/OFF MOUSE

MWP141-P1M designed 2 methods for power saving, you can power ON/OFF by A or B.

A. The MWP141-P1M mouse is designed to automatically turn off when you store the

wireless USB receiver in its bottom. Release the receiver from the bottom to power on.

B. By pushing right, left & scroll wheel to power off, click any button to power on.

OPERATIONS ON POWER SAVING MODE:

In order to conserve battery power, the mouse is designed to reduce power consumption

MWP141-P1M 27MHz Wireless Optical Mouse

page 4 of 8

1.0 Edition