AAVIX AGT310 Manuel du propriétaire - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} AAVIX AGT310. AAVIX AGT310 17 pages. 2x9v smart metal detector

Imprimer la page
detector sounds low , medium, high tones respectively. After
about 2 seconds the detector enters into stand-by state. At
this time the default mode is DISC. LCD displays DISC of 00
and SENS of 6 bars.
2. TESTING AND USING THE DETECTOR
To learn how the detector reacts to different metals, you
should test it before you use it the first time. You can test the
detector indoors and
outdoors.
INDOOR TESTING AND USE
1. Rotate the VOLUME switch clockwise away from OFF to
power on the detector.
2. Setting the operating mode:
(1) DISC: Press DISC, then + or – to set the DISC numeric
value. If the DISC value is set to 00, the detector can
detect all metals. If you want to find one of the target
material listed on the LCD, you can set the relative
numeric range of DISC by pressing DISC then + or -. For
example, the numeric range for 5¢ is 6-17, you can
simply press DISC, then set the DISC number to 7 or 10
by pressing + or -. If the detector finds a coin of 5¢, the
cursor above 5¢ will light.
Note:
1. It is recommended to select the lower or medium
value of the numeric range. Because if you select a
top value, you might miss the target below the
selected value.
2. If you don't press the buttons (DISC,+,-) within
about 2 seconds, the detector will enter the
standby state.
(2) NOTCH: Press NOTCH, then + or – to select the target to
8