A.B.S. FIREKILL 15228 Données techniques

Parcourez en ligne ou téléchargez le pdf Données techniques pour {nom_de_la_catégorie} A.B.S. FIREKILL 15228. A.B.S. FIREKILL 15228 3 pages. 1-3-6-9-12 kg powder abc

Imprimer la page

Technical Bulletin

FIREKILL SYSTEMS 1-3-6-9-12 kg POWDER ABC

RINA APPROVED ISO 9094:2015 No. 525310CS/002- ISO 14520

Description:

FIREKILL is an automatic extinguishing system composed by a

pressurized cylinder filled with

It is equipped with manual remote control and equipped with a

thermosensitive bulb, at 93°C (or on request at 68°).

It must be equipped with pressure switch to check charge.

If the fire extinguisher is located inside the space protected or if

the activation of the fixed system is automatic, a visual indication

of discharge outside the protected room shall be provided.

The visual indication must be chosen by Customer

depending on the detection system specifications.

FIREKILL has a versatile valve, completely automatic without use

of any source of energy. It has a manual remote control pull cable

or on request a remote battery control electric box actuator.

Moreover it is possible to connect a control panel that controls the

smoke detectors.

FIREKILL unique valve has two outlet diam. 3/8" pipes, a maximum

of 4 nozzles, it may distribute the jet with precision in the effective

point of the fire risk.

Assembly without necessity to thread tubes,

extremely easy and quick. Suitable also to protect mixers of

varnishes, garages, flammable liquids storage, etc.

Extinguishing agent

Dry chemical powder ABC 30% is produced in according to EN

615 (1995) and ISO 9001 quality control.

The basic components of dry powder are ammonium phosphate

and ammonium sulphate with special silicones additives enabling

easy flow discharge and avoiding any checking process.

Dry powder is not corrosive, not abrasive, non toxic for humans

and animals.

Note: other kinds of powder may be used ABC 30% ask our

technical office for compatibility.

The kit includes following parts:

Steel cylinder CE;

•

Rapid discharge valve made of chromed brass M30x1,5 with

•

manometer and thermosensitive bulb at 93°C (5);

Extinguishing agent;

•

Pipe with fast connection couplings (3);

•

Discharge nozzles made of chromed brass (1);

•

Remote control with handle (4+2);

•

Electric actuator (6) (optional) which connects the remote

•

control to an automatic control panel;

Wall bracket (8);

•

Use:

(2)

1) Pull the handle

in case of fire or

2) (If installed) Push the button on the control box to activate the

pyro. actuator;

3) The temperature higher than sprinkler bulb temperature will

activate the FIREKILL.

Operation:

The unit is pressurized at 14 bar at 20°C.

Code

Charge Protected zone

15241

15227

15228

15226

15229

On request it will be availabe also 2 and 4 kg

Lombardia Street 310, 20861 S.Dam. Brugherio

Tel. +39 - 039 - 839631 - Fax. +39 - 039 - 8396349

1370

e-mail:[email protected]

EC certificate

POWDER

ABC.

Illustration 1

Q.ty nozzle

1.7

5.1

Technical data are subject to modification

for improvements without prior notice

a.b.s. S.r.l. (Milan) Italy

www.absfire.it

Capital euro 2,000,000.00

Installation (illustration 1)

The FIREKILL must be hanged to its metal wall bracket inside or

outside the protected area.

Check the pressure looking at the pressure gauge the needle

must be in green sector. Fix the pipes (3) from the FIREKILL body

to the area to be protected, connect the discharge nozzles (1) at

the end of the pipes (3), near the dangerous point or the

protected area.

Fix the remote control cable (4) to the hexagon (7) and to the

remote control handle (2).

Safety pin (5) must be pulled out at the end of all above

operations. Now the FIRE KILL is ready to work.

FIREKILL can be activated manually by pulling the remote control

handle (2), otherwise automatically when the bursting temperature

of Sprinkler bulb is reached.

Bulb glass can be supplied with bursting temperature at 93 or

68°C.

The electric actuator (6) can be supplied on request. It can be

connected with an emergency control push button or through a

control panel in case there is an automatic detection system.

A standard detection system for our firekill system is composed by:

Low pressure switch cod. 23024, which directly indicates

•

alarm leaks or discharging In case of need of the low pressure

switch, please inform the manufacturer before ordering, so we

can mount it before the pressurization process;

Control panel which enable the perfect control of the full system

•

cod. 23022 or 23022_1 or 23023;

Thermosensitive detectors, cables or candels.

•

The electric actuator is a pyrotechnical charge, 5 years guaranteed

at a work temperature from -20°C up to +80°C and humidity of

100%. The pyrotechnical charge can work with minimum 12 V

tension and 1 A current.

Electrical connection:

The electrical connection to the pyrotechnical actuator must be

made by a shielded wire; it must be connected directly from battery

to the emergency push-button (Control Box Cod. 23022, 23022_1

or 23023) and to the actuator. Avoid to connect the actuator in

different positions (like fuses panel) to avoid accidental activations.

Torque force:

The valve is screwed down to the tank at the prefixed torque

between 5 and 6 Kg/m (i.e. between 50 and 60 Nm).

Max pipe

length mt x 2

Mount only

in vertical position.

For horizontal or

upside

need, contact

factory when

ordering

Data Sheet

Code

Date

Check

15241

Fire Extinguisher

22/02/15

Rev

Pag.

1/3

/AL