AVLink H3S-01W Manuel de l'utilisateur - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AVLink H3S-01W. AVLink H3S-01W 2 pages. Hdmi to 3g-sdis conversion box

Imprimer la page
Installation
1. Connect the H3S-01W video input HDMI connector with
HDMI cable from different video equipment.
2. Connect the BNC extension cable between the monitor
and the "3G-SDI Out" port of H3S-01W.
3. Connect the power cord and turn on the H3S-01W.
4. Turn on the HDMI video source device.
Support Vedio Mode
Analog
Resolution
525i(NTSC)
1440x480
625i(PAL)
1440x576
720p
1280x720
1080i
1920x1080
1080p
1920x1080
1080p
1920x1080
DIP Switch Settings
1 OFF HDMI AUDIO OFF
ON HDMI AUDIO ON
2 OFF GROUP 1-2,1-8CH
ON GROUP 3-4,9-16CH
OFF,OFF Group1, 1-2 CH_Group3, 9-10 CH
OFF,ON
Group1, 3-4 CH_Group3, 11-12 CH
3,4
ON ,OFF Group2, 5-6 CH_Group4, 13-14 CH
ON ,ON
Group2, 7-8 CH_Group4, 15-16 CH
5 Reserved
*Note1.
Only transmits 2 channel audio from HDMI to SDI at once,
even with multi-channel HDMI PCM audio.
© C&C TECHNIC TAIWAN CO., LTD. All rights reserved.
Trademarks:
All the companies, brand names, and product names
referred to this manual are the trademarks or
registered trademarks belonging to their respective
companies.
-3-
Frequency(Hz)
59.94
50
50/59.94/60
50/59.94/60
23.98/24/25/29.97/30
50/59.94/60