Aqua Cooler AC-NNEBFPG Manuel d'utilisation et d'entretien - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Aqua Cooler AC-NNEBFPG. Aqua Cooler AC-NNEBFPG 11 pages. Surface mounted bottle filler conversion

Imprimer la page

PREPARATION CONT.

Remove fountain nose assembly. Tool Needed: T20 Torx bit

•

Remove 4x #10 Torx screws from the fountain.

•

Disconnect ONLY the nose assembly wires from the cold control and solenoid valve. Leave

all other wires connected to the cold control and solenoid valve. For nonrefrigerated models,

unplug the unit.

•

Disconnect the water line from the bubbler inside the nose. DO NOT disconnect from the

fountain.

DO NOT REMOVE COLD CONTROL OR SOLENOID VALVE

ASSEMBLIES FROM THE FOUNTAIN.

After the nose assembly has been removed, cover the two bare terminals with

the insulated female spade terminals (provided) for safety.

NOTE: The image shown may differ from some

models but the instructions will still apply.

Your Partner in Cool.

PREPARATION CONT.

Locate the solenoid valve on the Elkay unit. Disconnect both water lines from the solenoid valve.

Join the two water lines together using a ¼" elbow fitting (provided) (Fig. 7A).

Allow the cooling tank water outlet line to extend freely upward (Fig. 7B).