Aqua Creek PRO SPA 60 Manuel - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Aqua Creek PRO SPA 60. Aqua Creek PRO SPA 60 17 pages.

ASSEMBLY INSTRUCTIONS

The lift arrives mostly assembled on a crate. Begin by locating all parts for your lift in the parts

lists below.

PARTS LIST

CRATE 1

1. PRO SPA 60 ASSEMBLY

ITEMS INCLUDED WITH PRO SPA 60 LIFT

1. (1) 24V BATTERY

2. (1) BATTERY CHARGER

3. (1) HAND CONTROLLER

4. (1) SEAT BELT

ITEM # QTY.

1/2" x 1-1/2" HEX HEAD BOLT S.S.

5. (1) HARDWARE BAG

9/16" Wrench (2)

3/4" Wrench

Hammer

1 1/8" Masonry Bit

1.) Locate the 24v battery and wall mount battery charger. Batteries arrive from the factory

partially charged. Charge the battery for 24 HOURS before initial use of the lift.

Determine the location that you want to position the wall mount charger (next to a 110v

AC outlet), and fasten it with the supplied screws. Plug in the charger to the outlet.

2.) Clip the battery to the charger and allow the battery to charge. When the battery is

correctly mounted to the charger, the CHARGE light will illuminate. When the battery

is fully charged, the CHARGE light will GO OFF.

3.) Go to the next section "PRO SPA 60 ASSEMBLY".

HARDWARE BAG

DESCRIPTION

4" DUAL THREADED ANCHOR

1/2" FLAT WASHER S.S.

3/8" x 1-3/4" HEX BOLT, S.S.

3/8" NYLOCK NUT

PART USE / LOCATION

STANDARD ANCHOR BOLT

Drill

Marker/Chalk

Epoxy or Hydraulic Cement

ANCHOR

ANCHOR BOLTS

CHAIR ACTUATOR