A.H. Systems AK-285T Manuel d'utilisation - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} A.H. Systems AK-285T. A.H. Systems AK-285T 15 pages. Shielding effectiveness antenna kit
Imprimer la page
A.H. Systems AK-285R Shielding Effectiveness Antenna Kit
TRIPOD AND MOUNTING ADPTERS
ATU-510 Tripod
AEH-510 Azimuth and Elevation Head
The azimuth and elevation head (AEH-510) mounts to the tripod (ATU-510) top
and allows the antennas to be rotated 360 degrees, titled up and down between
horizontal and vertical polarization. The tripod and azimuth and elevation head
come in their own carrying case. Each tripod leg is independently adjustable in
angle and length to facilitate antenna height setting. The tripod legs have a rubber
tip on one end for indoor or hard surface use, and a metal spike on the other end
for outdoor soft surface (such as dirt) use.
TRANSIT STORAGE CASES
TCC-510 Tripod Carrying Case
TSC-542 Transit Storage Case
The antenna carrying case (TSC-542) prevents damage and loss of antennas
when storing or transporting the antenna kit. The case is constructed of lightweight
and durable polyethylene. Two case keys are provided with the case.
OPTIONAL EQUIPMENT
The AK-285R case comes with three additional cutouts for optional
preamplifiers. In order to improve overall system sensitivity, the following
equipment will be required:
PAM-0118 Preamplifier 20 MHz – 18 GHz
The preamplifier will increase the system sensitivity 33 dB and is recommend for
the SAS-510-2, SAS-544F and SAS-571. An optional short length cable (SAC-
18G-0.5), is required to connect the preamplifier to any 50-ohm receiver or
spectrum analyzer.
NOTE: Care must be exercised to insure that the maximum input signal or ESD
does not exceed +10 dBm causing damaged to the preamplifier.
SAC-18G-0.5 Low-Loss Cable up to 18 GHz
The Low-Loss, High Frequency cable is recommend for connecting the optional
preamplifier to any 50-ohm receiver or spectrum analyzer. Our Low-Loss High-
Frequency flexible cables are the preferred choice over standard cable types. With
improved power handling, low VSWR, and high frequency capabilities, the Low-
Loss cables can be made to your specified length and delivered in two days. The
1/2 meter SAC-18G-0.5 has a typical attenuation of 1.0 dB at 18GHz.
© A.H. Systems inc. – August 2011
REV A
•
PAM-0118 with an SAC-18G-0.5
•
PAM-1840 with an SAC-40G-0.5
10