Dexter Laundry T-950 Manuel d'installation et d'utilisation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Dexter Laundry T-950. Dexter Laundry T-950 18 pages. 80lb capacity computer control opl washer

Imprimer la page
INJECTION SOURCE DETAILS
The washer control may be programmed to send 120V output signals for a chemical injection
system. The signals are not intended as a power source and must be limited to less than 100
milliamps of current. There is a separate terminal block for connection of the external injection
signals. For the injection sources, program codes 0 through 6 are as shown in the table below.
Dexter
Recommended
Connections
Detergent
Bleach
Starch
Sour/Softener
CHECKOUT
After all mounting, plumbing and electrical work is completed, the washer should be run through
a cycle and checked for water leaks and proper functioning.
Controller
Injection
Programmed
Terminal Block
Signals
Circuits
1
2
3
4
5
A and B
6
C and D
0
None
A
B
C
D