Aqua Creek Products F-EZPL2 Manuel - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Aqua Creek Products F-EZPL2. Aqua Creek Products F-EZPL2 12 pages. Pool lift and hard seat option
Également pour Aqua Creek Products F-EZPL2 : Manuel (11 pages), Instructions d'installation, d'assemblage et d'utilisation (12 pages)

Imprimer la page

NN - 3/8"-16 NYLOCK NUT

PART NO. INV00739

WF - 3/8" FLAT WASHER

PART NO. INV01174

REMOVE THE HYDRAULIC RAM FROM

THE SHIPPING BOX. CONNECT THE

HYDRAULIC RAM TO THE MAST AND BOOM

ARM. TIGHTEN NYLOCK NUTS.

NOTE: BE CAREFUL NOT TO OVERTIGHTEN

BOLTS. OVER-TIGHTENING

CAN CAUSE DAMAGE AND COMPROMISE

THE SAFETY OF YOUR LIFT.

DETAIL STEP 03-B

SCALE 1 : 3

PRODUCT ASSEMBLY

DETAIL STEP 03-A

SCALE 1 : 3

WF - 3/8" FLAT WASHER

PART NO. INV01174

BS - 3/8"X7/8"X5/16"-18 SHOULDER BOLT

BS - 3/8"X1 1/4"X5/16"-18 SHOULDER BOLT

PART NO. INV00461

Aqua Creek Products

LIFT THE EZ2 MAST ASSEMBLY FROM

THE SHIPPING CONTAINER. INSERT THE

1.90" [48mm] POST OF THE MAST

ASSEMBLY INTO THE DECK ANCHOR. EASE

THE MAST ASSEMBLY DOWN UNTIL IT

RESTS ON THE INNER SURFACE OF THE

ANCHOR. THE SQUARE MAST TUBE WILL

REMAIN ABOVE THE DECK SURFACE

APPROXIMATELY 1/2"

REMOVE THE BOOM ARM FROM THE

SHIPPING BOX. CONNECT THE BOOM ARM

TO THE MAST. TIGHTEN NYLOCK NUTS.

NOTE: BE CAREFUL NOT TO OVERTIGHTEN

BOLTS. OVER-TIGHTENING

CAN CAUSE DAMAGE AND COMPROMISE

THE SAFETY OF YOUR LIFT.

BS - 1/2"X2 3/4"X3/8"-16 SHOULDER BOLT

PART NO. INV00455

STEP 03-B

NN - 5/16"-18 NYLOCK NUT

PART NO. INV00742

WF - 5/16" FLAT WASHER

PART NO. INV01176

PART NO. INV01870

STEP 03-A

8/15/2022 12:41:43 PM PAGE - 5