AVLT-Power Non-VESA Monitor Adapter Kit for 13" to 27" LCD/LED Screen Sizes Manuel d'instructions d'installation - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} AVLT-Power Non-VESA Monitor Adapter Kit for 13" to 27" LCD/LED Screen Sizes. AVLT-Power Non-VESA Monitor Adapter Kit for 13" to 27" LCD/LED Screen Sizes 8 pages.

Imprimer la page

Installation

Step 1) Assemble the Support Arm

Select Bolt (F/G/H) according to the depth of your monitor and use it to install Support

(B) onto Arm (A) using a Phillips screwdriver. Do not fully tighten until instructed to do

so, see Figure 1.

Step 2) Install the Support Arm to the VESA Plate

Note: Select one of the four the installation options that matches your monitor's backplate

surface.

2A) X-pattern: Suitable for all backplate surfaces. Use two sets of bolt/washer/nut to attach

each arm to the VESA plate.

1. Use Bolt (E), Washer (I) with Nut (D) and tighten using Wrench (J), see Figure 2. Note:

Do not fully tighten until instructed to do so in Step 3.

Figure 1

Figure 2