AVLT-Power AcePro-CEC4-1 Manuel d'installation rapide - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} AVLT-Power AcePro-CEC4-1. AVLT-Power AcePro-CEC4-1 12 pages. 4k hdmi hdbaset extender with ir & poc

Imprimer la page

INTRODUCTION

The AcePro-CEC4-1 4K HDMI HDBaseT Extender with IR & PoC boosts up your video/audio

transmission distance up to 60m (198ft) in HDTV 1080p with 36-bit color depth. AcePro-CEC4-1

also supports the most advanced 3D video format compliant with HDMI specification and therefore

guarantees the highest 3D video compatibility on the market. With only one cost effective Cat.5/5e/6

cable, users can readily extend HDTV sources from DVD players, Blu-ray Disc player, PS3, PC, and

any other kinds of sources compliant with TMDS to distant display monitors including HDMI or DVI

enabled TV sets or LCD PC monitors. With the advanced design for the latest HDMI technology,

deep color video, DTS-HD or Dolby TrueHD audio, and HDCP supports and compatibility are all

further insured. This flexibility makes HDCP compliant DVD players or PS3 transmit utmost high

quality video and audio with a greater distance at the minimal cost, when integrating several

components apart. In addition, AcePro-CEC4-1 is also equipped with bi-directional IR pass-through

path. These bonus features allow users to boost IR control distance up to 60m (198 ft) and makes

IR control possible through only single Cat.5/5e/6 cable including HDMI signals. In addition, AcePro-

CEC4-1 also supports PoC (Power over Cable) which can power both units from either TX or RX

with power supply.

The AcePro-CEC4-1 includes two units: transmitting unit AcePro-CEC4-1-TX and receiving unit

AcePro-CEC4-1-RX. The transmitting unit is used to capture the input HDMI / DVI signals with IR

control packets and carry the signals via one cost effective Cat.5/5e/6 cable. The receiving unit is

responsible for equalizing the transmitted HDMI signal and reconstructing IR signals. AcePro-CEC4-

1 offers the most convenient solution for digital signage with long distance A/V transmission path,

and is ready for your next HDMI generation and applications!

FEATURES



Supports HDMI Deep Color & full 3D & 4K2K@30*(HDBaseT technology)



Extend the transmission up to 60m (198ft) from the HDMI source at Full HD 1080p 36-bit and

35m (114ft) at 4K2K@30



Supports PoC(Power over Cable) which can power both units from TX or RX side with power

supply



HDCP & EDID Bypass



CEC support



Auto equalization



Pure unaltered uncompressed 7.1ch digital HDMI over Cat.5/5e/6 cable transmission



DTS-HD Master Audio and Dolby TrueHD high bit rate audio support



Supports full frequency IR signal from 20KHz to 60KHz



Bi-directional IR path-through



Wall mounting housing design for easy and robust installation

*NOTE: When the RX of this extender connects to a 4K@60Hz monitor, the monitor might keep blinking

since this extender only supports 4K@30Hz resolution. Please downscale the HDMI source at your TX

side to 4k@30Hz to have a complete transmission.



The length depends on the characteristics and quality of the cables. Higher resolutions and longer

transmission distances require low skew cables (<25ns/100m) for best performance. Unshielded CAT6 with

metal RJ45 connectors is recommended.

-2-