Aqua Creek Products MIGHTY 400-BLUE Manuel - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Aqua Creek Products MIGHTY 400-BLUE. Aqua Creek Products MIGHTY 400-BLUE 13 pages.

Imprimer la page
THE AQUA CREEK FOOTREST ASSEMBLY IS DESIGNED TO FIT UNDER THE SEAT AND
IS INSTALLED INSIDE THE 2" SQUARE TUBING THAT SUPPORTS THE SEAT FROM
UNDERNEATH. TO INSTALL THE FOOTREST;
3
INSERT THE FOOTREST ASSEMBLY INTO THE 2"X2" SQUARE
TUBING THAT SUPPORTS THE SEAT UNTIL THE PLASTIC INSERT
OF THE FOOTREST ASSEMBLY SITS FLUSH AGAINTS THE END OF
THE 2"X2" TUBE. USING THE SUPPLIED 1/4" HARDWARE,
FASTEN THE LEGREST ASSEMBLY TO THE 2"X2" TUBING.
DETAIL A
SCALE 1 : 4
WF - 1/4" FLAT WASHER
WL - 1/4" LOCK WASHER
KNOB - 3/4" KNURLED - 1/4-20 x 3/4"
C
4
REMOVE THE FULLY CHARGED BATTERY FROM THE
CHARGER AND INSTALL THE BATTERY TO THE CONTROL
BRACKET, ON TOP OF THE CONTROL BOX. ONCE SECURE,
CONNECT THE BATTERY CABLE TO THE CONTROL BOX
CABLE. THE LIFT WILL ONLY OPERATE WHEN THE
BATTERY IS CONNECTED PROPERLY.
WHEN THE LIFT IS NOT IN SERVICE, STORE BATTERY ON
THE CHARGER!
5
WITH THE LIFT FULLY ASSEMBLED AND ANCHORED,
RUN THE LIFT COMPLETELY OUT AND BACK IN 3 TO 5
TIMES, WITHOUT WEIGHT, FOR THE LIFTS "BREAK IN"
CYCLE PERIOD.
CONGRATULATIONS, YOUR LIFT
B
IS NOW READY FOR USE!
DETAIL B
SCALE 1 : 3
MIGHTY 400 - BLUE
CATALOG NO. F-MTY400
A
DETAIL C
SCALE 1 : 3
DO NOT UNPLUG
REMOTE
ACTUATOR
MOTOR
9/28/2022 1:39:29 PM PAGE - 6