AVM PA 30.3 Manuel d'utilisation - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} AVM PA 30.3. AVM PA 30.3 20 pages.

NOTE: In addition to the volume control (see section 2.5), the options for adjusting the input

sensitivity (see section 2.6), the balance (see section 2.7) and all sound settings (see section

2.8) of your PA 30.3 are disabled.

1.11.1 Activating the AV Pass Through function

To activate the AV Pass Through function for a high-level input (17,19), first select the desired

input with the source selector (3) in normal operating mode. Then switch the unit to stand-by

mode with the power button. Then keep the LEVEL button (7) pressed while switching on the

unit with the on/off button (1). Wait a short moment until the starting process is completed.

During the startup process, the name of the selected input is shown on the left side of the

display and a hint to the selected mode is shown on the right side.

FIX = AV Pass Through function is activated (fixed output level)

VAR = AV Pass Through is disabled (variable output level)

To activate the AV Pass Through function for another high level input (17,19), select the desired

input with the source selector (3) and repeat the procedure described above.

NOTE: When the AV Pass Through function is activated, the right part of the display shows

FIX instead of a volume value. Please note that when the AV Pass Through function is

activated, the volume control (9), BASS button (4), TREBLE button (5), LEVEL button (7) and

BALANCE button (8) have no function. When one of these controls is pressed, the FIX indicator

flashes briefly - but the corresponding function is only available again after deactivating the AV

Pass Through function (see following section).

1.11.2 Disabling the AV Pass Through function

The AV Pass Through function remains active even after the power is turned off for a selected

high-level input. To deactivate the AV Pass Through function, first select the desired high-level

input with the source selector (3) in normal operating mode. Then switch the unit to stand-by

mode with the power button. Now hold down the LEVEL button (7) while you switch on the unit

with the on/off button (1). Wait a short moment until the starting process is completed. During

the startup process, the name of the selected input is shown on the left side of the display and

a hint to the selected mode is shown on the right side. When the display VAR appears instead

of FIX, the AV Pass Through function is disabled for the selected high-level input.

To deactivate the AV Pass Through function for another high-level input, select the desired

input with the source selector (3) and repeat the procedure described above.

NOTE: To deactivate the AV Pass Through function of several high-level inputs with one

keystroke, you can also use the RESET function (see section 2.9). However, please note that

a reset will reset the entire device to its factory settings.