Aqua Creek Products F-044SCH Manuel d'instructions - Page 13
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Aqua Creek Products F-044SCH. Aqua Creek Products F-044SCH 16 pages. 24v solar charger
Imprimer la page
24V
BATTERY
Once the BATTERY CONNECTOR has been installed, and a battery is installed onto the lift the 24V Solar
Charger will turn on and start trickle-charging the battery. Without the battery installed the 24V Solar
Charger will be off , and will remain off until a battery is installed.
When a 24V battery is installed onto the lift the LED INDICATOR will fl ash "2" to show that a 24V battery
has been detected and the charger is operational.
The Solar-Panel power indicator will light up (red) when the Solar Charger has been properly attached to
the battery. The charger will work even on cloudy days, but not as effi ciently.
When the battery is installed and there is suffi cient sunlight, the CHARGE INDICATOR will fl ash (red)
slowly, indicating the battery is being charged. When the controller detects the battery is fully charged
the fl ashing will stop. Under most conditions the CHARGE INDICATOR light will be fl ashing whenever a
battery has been installed.
The 24V Solar Charger will continue to charge the battery, even as the lift is being used. So once the 24V
Solar Charger has been installed it will function without any need for adjustment. The user should check
the indicators periodically to make sure it is working.
Copyright © 2017 Aqua Creek Products All Rights Reserved
Solar Charger Operation
CHARGE
WHEN THE BATTERY
IS CONNECTED THE
CONTROLLER
INDICATOR WILL
(UNDERNEATH)
FLASH "2" AND THE
SOLAR CHARGER
WILL TURN ON
BATTERY/POWER INDICATOR:
TURNS ON (RED) WHEN
THE BATTERY IS CONNECTED
CONTROL
BOX
CHARGE INDICATOR:
FLASHES SLOWLY (RED)
WHEN BATTERY IS CHARGING
CHARGE
CONTROLLER
13
Revised 12/4/17