A.J.Antunes McDONALD'S CTX-200 Manuel - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} A.J.Antunes McDONALD'S CTX-200. A.J.Antunes McDONALD'S CTX-200 20 pages. Club toaster

Imprimer la page
Club ToasTer CTX-200
PLTN
Light
PLTN
MOTOR
ADJUST
PRGM
CT
BELTS
STOP/START
figure 6. adjusting toasting Quality

Viewing the Program Mode settings

Follow these steps to view these settings:
1. From the Ready or Wait modes, press and hold
the PrGM button for 3 seconds.
2. The following appears on the display:
Program Club
Press Select
3. If desired, use the NeXt or PreV button to scroll
through the following categories:
• Speed
• Language (default setting is English)
• Units (F/C) (default setting is F)
• Top Temp
• Bottom Temp
4. When the desired category is reached, press the
select button oNCe. This will cause the selected
category value to blink indicating it is in edit mode.
Note: the current setting will be the fIrst setting
shown in the display.
5. Press the PREv or NEXT buttons while the value
is blinking to change adjust the setting.
Note: do Not change any of these settings for aNY
reason! for assistance in changing these options,
please call the factory.
6. When you are finished viewing settings, press
the ProGraM button to return to the Ready
screen or wait 10 seconds until the Ready screen
appears.
A.J. Antunes & Co.
oPeratIoN (continued)
Buns
Dark
PREV
NEXT
SELECT
Note: the unit will exit the Program Mode after 10
seconds of inactivity.
Club toaster settings
The following table describes the recommended Club
Toaster operating settings.
setting
Bottom Temp. (Lower
Platen)
Top Temp (Upper Platen)
Speed (17 seconds)
Note: If you wish to change any of the above set-
tings, contact the factory for instructions.

Ct unit status Mode

This mode provides feedback on unit performance. No
adjustments can be made in this mode. Also, the dis-
play remains on the selected screen in this mode until
you switch screens or exit the Unit Status mode.
Follow these steps to view the Unit Status mode:
1. From any operation mode (Ready or Wait) press
and hold the ADJUST button for 3 seconds.
2. The following appears on the display in sequence:
•
Speed-Motor-Set Pt
•
Total Hours
•
Ambient (air temperature inside the electrical
enclosure)
•
Top Temp (Actual temperature and set point
temperature)
•
Bottom Temp (actual temperature and set point
temperature)
8
Value
570° F (299° C)
570° F (299° C)
2300
P/N 1010905 Rev. B 03/12
McDonald's