Aqua glider ZS30 Manuel de l'utilisateur - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Aqua glider ZS30. Aqua glider ZS30 11 pages. Motorized inflatable ride on
Imprimer la page
12. Make sure the seal and sealing surfaces are clean and
lubricated before replacing the Battery Door. (see fig.10)
You should use silicon grease to lubricate the seal - this
can be purchased from your local hardware store.
13. Replace the Battery Door and turn the Battery Door
Screw making sure it is tightened completely. (see
fig.11)
Fig.9
Sealing surfaces
Seal
Fig.10
9
Replacing a flat battery with a fully charged battery.
1. Follow the steps 1 to 5 above.
2. Remove the flat battery.
3. Install and connect the charged battery.
4. Follow steps 12 to 13.
Buying Rechargeable Batteries
It is a good idea to have a second battery so that when
one has run out you can swap it over with a charged
one. Contact your dealer to purchase additional
rechargeable batteries.
Battery & Charger Ratings
Rechargeable battery: 12V / 2.8Ah
Charger: Output-12V / 500mA
Fig.11
10