Dezac Abs & Arms Toning Belt TB-40 Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Dezac Abs & Arms Toning Belt TB-40. Dezac Abs & Arms Toning Belt TB-40 17 pages.

Imprimer la page

Getting Started

Belt & Arm Toner set-up
The Abs & Arms Toning Belt is designed to fit a wide range of waist sizes from 27" to 63". To increase
the size of the Ab Belt, use the Belt Extension supplied.
1. Make sure the unit is switched off. If you have switched on the unit accidentally, then switch it off
by pressing the ON/OFF button.
2. Locate the 2 output sockets on top of the control unit.
3. Choose your toning workout:
8
Toning abs only
Locate the connecting lead from within the
side pocket. The lead extends to 60cm and will
auto-retract. Plug the connecting lead into either
socket on the top of the control unit.
Toning arms only
Plug one end of the connecting lead into each
arm toner (either socket) and the other end into
the output socket on the top of the control unit.
Both arm toners can be connected at the same
time.
Toning abs & arms
Both the ab belt and arm toner can be used
together, however, you will notice a reduction
in a maxiumum intensity level. Run the ab belt
from one output socket on the control unit. Then
use one of the connecting leads to link the two
arm toners and the other lead to connect to the
control unit.