AQUA JOY SAVER Manuel de l'utilisateur - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AQUA JOY SAVER. AQUA JOY SAVER 4 pages. Bathlift

CONNECTING THE HAND CONTROL TO THE BATHLIFT:

PUT THE CONNECTOR OF YOUR CHARGED HAND CONTROL AND

THE CONNECTOR ON THE BACK OF THE BATHLIFT TOGETHER.

PUT THE CLIP IN PLACE OVER THE PRONGS ON THE

CONNECTORS (AS SHOW IN THE PICTURES BELOW).

DISCONNECTING THE HAND CONTROL FROM THE BATHLIFT:

REMOVE THE HAND CONTROL FROM THE BATHLIFT BY UNCLIPPING THE CLIP

AND PULL THE HAND CONTROL CONNECTOR AND THE BATHLIFT CONNECTOR

APART.

HOW TO REMOVE THE BATHLIFT FROM THE BATH:

PRESS THE "DOWN" BUTTON ON THE HAND CONTROL

AND TAKE THE BATHLIFT TO ITS LOWEST POSITION IN

THE BATH. REMOVE THE HAND CONTROL FROM THE

BATHLIFT BY UNCLIPPING THE CLIP AND PULL THE

HAND CONTROL CONNECTOR AND THE BATHLIFT

CONNECTOR APART (AS SHOWN ON PAGE 5).

PUSH THE TWO SIDE FLAPS INWARD ONTO THE SEAT.

LIFT THE BATHSEAT UPWARDS AWAY FROM THE BATH

AND THEN OFF THE FRAME OF THE BATHLIFT.

TO REMOVE THE FRAME, PLACE ONE HAND ON THE

LIFTING BAR AT THE REAR OF THE FRAME AND LIFT

TO RELEASE THE BATHLIFT FROM THE BATH.

CONTINUE TO LIFT AND THE SUCTION FEET AT THE

FRONT OF THE FRAME WILL RELEASE

AUTOMATICALLY.

THEN SIMPLY LIFT THE FRAME OUT OF THE BATH.

FOLD IN

LIFT UP

LIFT OUT