DeZurik AFR2 Manuel d'instructions - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} DeZurik AFR2. DeZurik AFR2 6 pages. Filter regulator
Également pour DeZurik AFR2 : Manuel d'instructions (6 pages)
Imprimer la page
DeZURIK
AFR3 Filter Regulator used on Pneumatic Cylinder Actuators
Maintenance
4. Liquid level in the bowl must be kept below the level indicator line as marked. It is recommended
practice to drain a unit equipped with the manual drain at least once during an eight (8) hour pe-
riod. To do so, rotate the drain knob to the left one or two turns.*
5. Before returning unit to service, insure that all seals have been properly reinstalled or replaced and
components requiring torque have been properly tightened. Also, insure that bowl seal O-ring
and bowl have been installed properly and that the bowl is in the locked position and the drain is
properly secured.
Note: In the event the drain knob is over-rotated, it may become disengaged from the drain stem. In
such a case, pull down on both the knob and the stem while rotating clockwise to re-engage. (view
from below)
1
2
3
4
5
6
7
8
9
10
11
12
August 2013
continued
13
15
16
17
23
18
24
25
19
26
27
28
21
22
28
14
1. KNOB
2. PANEL NUT
3. BONNET
4. BODY COVER
5. THRUST WASHER
6. ADJUSTING SCREW ASSEMBLY
7. MAIN SPRING
8. SLIP RING
9. DIAPHRAGM ASSEMBLY
10. BODY ASSEMBLY
11. VALVE ASSEMBLY
12. VALVE SPRING
13. "OLD" DESIGN
14. "NEW" DESIGN
15. DEFLECTOR
16. 5 MICRON ELEMENT
17. RETAINER
18. AUTOMATIC FLOAT DRAIN
19. AUTO DRAIN O-RING
20. BOWL O-RING
21. NETAL BOWL W/SIGHT GAUGE
22. AUTOMATIC DRAIN NUT
23. DRAIN STEM
24. DRAIN STEM O-RING
25. DRAIN SEAT
26. DRAIN SEAT O-RING
27. PLASTIC BOWL/BOWL GUARD ASSEMBLY
28. DRAIN KNOB
Page 5
D11033