DF-models Sky Watcher Manuel - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} DF-models Sky Watcher. DF-models Sky Watcher 19 pages.

4.Pairing drone:

Press and hold the button , at the same time, turn on the remote

control power switch and then release the two buttons (the remote

control indicator light flashes quickly).Press and hold the drone power

switch for three seconds, wait for the front and rear lights of the drone

to flash slowly and then release the power switch button.Push the left

joystick on the remote control to the top for two seconds, then pull the

left joystick to the bottom for two seconds.

(At this time, the remote control indicator light turns to green color and

flashes slowly.) Release the left joystick, when the front and rear lights

of the drone flash quickly at the same time, the frequency pairing is

successful.

Press the Normal Mode Button, the drone will fly in the normal mode,

no GPS function

Two speeds for the drone, fast and slow.

7.GPS mode

After the drone is paired sucessfully and started to fly, press the GPS

mode button, the drone will fly in the GPS mode.

8.Auto return home

When the drone is flying in the GPS mode, press the return button for

2 to 3 seconds, the drone will return to the position where GPS mode

started.

During the flying, the end users can enjoy the surround flight mode by

pressing the GPS mode button for 2 to 3 seconds until the remote

beeps "di, di" twice. During surround flying, the drone will fly in the 15

meters radius semicircle range.

During the surround flight, the

consumer can adjust the flying

radius of the drone by pushing the

direction joystick up or down, and

the speed of the drone can be

adjusted by pushing the direction

joystick to the left or right.