Aqua Lung Raptor Manuel du propriétaire - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Aqua Lung Raptor. Aqua Lung Raptor 20 pages.

REPAIRS

REPAIRING A HOLE IN A WATERPROOF BREATHABLE MATERIAL (continued)

3. Using a standard household clothing iron, set it to medium heat (no steam!). Using

the rubbing alcohol swab thoroughly clean/scrub the breathable material area around

the hole. Clean the heat patches: Give the smooth film side of the base patch and the

matt grey side of top patch a good wipe with the alcohol swab. Tip: if the hole is small,

circle it with pencil for easy identification while working on your drywear.

4. Place the base patch over the hole (paper up/smooth film down). Cover the base

patch and your drywear fabric with parchment paper before applying heat. Take heated

iron and apply pressure. Keep the iron moving in a circular motion. In 10 to 20 seconds

the film will liquefy (you will see evidence of this through the parchment paper).

5. Remove the iron and carefully peel away the paper backing. Take care not to burn

fingers. The adhesive must have melted into the woven fabric "tricot" layer to act as an

effective bonding layer for the top patch.

6. Take the top patch and lay it over the base layer, matte grey side down. Rim of

exposed base layer of top patch is cut smaller. Lay the sheet of parchment paper over

the top patch and heat for 10 to 20 seconds. Apply pressure and keep the iron moving

in a circular motion. Remove heat and parchment paper. Let patch cool. Your drywear

is now ready for use.

ENGLISH