Aqua Medic 400.15 Manuel d'utilisation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Aqua Medic 400.15. Aqua Medic 400.15 13 pages.

Aqua Medic 400.15 Manuel d'utilisation
The skimmer can now be filled by pumping water directly from the aquarium.
Ensure that the water level of the aquarium is not lowered too much.
-
Top up with salt water as necessary.
-
As soon as the water level in the skimmer reaches the height of the venturi pump, this pump should be
-
started.
After first use or after cleaning the skimmer, it takes some time for the initial foam to build up in the reaction
pipe of the collection cup. This is because the cleaned acrylic initially reacts with the water until a build up of
fatty acids naturally takes place.
After approx. 24 hours, the foam should be pushed slowly and evenly into the collection cup. The quantity of
liquid and organic substances depends on the pollution of the aquarium.
7. Maintenance
Collection cup: Depending on the organic load, the cup should be cleaned daily to weekly.
Reaction pipe: This needs only occasional cleaning; we recommend intervals from 6 to 12 months.
Venturi pump: Maintenance of the pump should be done at the same time as that of the reaction pipe:
- Drain the water out and dismantle the pump. Flush pump housing and venturi nozzle with clean water.
8. Failures
Failures may arise if:
- The ratio between supplied air and water quantity is not correct.
Cause:
Air injection nozzle is clogged or the pump chamber is dirty.
Action:
Dismantle venturi pump, clean it thoroughly, carefully clean the air injection nozzle with a thin brush or blunt
instrument and re-assemble the pump again.
9. Warranty conditions
AB Aqua Medic GmbH grants the first-time user a 24-month guarantee from the date of purchase on all material
and manufacturing defects of the device. Incidentally, the consumer has legal rights; these are not limited by
this warranty. This warranty does not cover user serviceable parts, due to normal wear & tear ie: impellers or
drive wheels etc. The original invoice or receipt is required as proof of purchase. During the warranty period,
we will repair the product for free by installing new or renewed parts. This warranty only covers material and
processing faults that occur when used as intended. It does not apply to damage caused by transport, improper
handling, incorrect installation, negligence, interference or repairs made by unauthorized persons. In case of
a fault with the unit during or after the warranty period, please contact your dealer. All further steps
are clarified between the dealer and AB Aqua Medic. All complaints and returns that are not sent to
us via specialist dealers cannot be processed. AB Aqua Medic is not liable for consequential damages
resulting from the use of any of our products.
AB Aqua Medic GmbH - Gewerbepark 24 - 49143 Bissendorf/Germany
7
- Technical changes reserved – 11/2019/v4