Aqua Medic Turboflotor multi SL Manuels d'utilisation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuels d'utilisation pour {nom_de_la_catégorie} Aqua Medic Turboflotor multi SL. Aqua Medic Turboflotor multi SL 8 pages.

Imprimer la page

Numbers see Fig.

18. filter tank

19. re-circulation pump

20. overflow chamber 21. Return flow into the aquarium

Fig.5: Turboflotor multi SL, set up adjacent to the filter tank of a sump or under tank

filter

5. Starting / Performance

The system can be started when the Turboflotor is correctly installed. After switching

the pump on, air is automatically drawn into the skimmer. To minimize the noise

level, connect the air inlet tube with the blue connecting piece of the silencer

supplied. Fix the silencer with the holding device on the aquarium or the filter system.

The needle wheel breaks the air into small bubbles. This method eliminates the

greater proportion of the noise. After the initial start, some hours may pass before the

first foam is pushed into the collection cup. This is due to a reaction between the

surface of the acrylic glass and the aquarium water. Equilibrium of electrical charges

takes place. After a maximum of 24 hours, the foam should push evenly into the

collection cup. The quantity of liquid and organic substances is dependent on the

pollution of the aquarium.