Aqua Medic Xenia 160 Manuel d'utilisation - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Aqua Medic Xenia 160. Aqua Medic Xenia 160 17 pages.
There is a blue fitting in the mounted bend of the return line. Here, air is sucked in when the pump in the
cabinet fails. This prevents the formation of communicating pipes and an overflow of the filter tank by
returning water.
When starting the aquarium, water has to be filled in until the filter tank is filled up to 10 – 12 cm in the
front part and then the pump has to be started. If the water level in the filter tank decreases, water has
to be filled in until the a.-m. maximum is reached. Take care that enough space is left so that the
inflowing water in case of failure or shutdown of the circulation pump still fits into the filter tank.
The cables of circulation pumps or other parts mounted in the aquarium can be routed through the empty
conduit downwards. If a plug is too big for this, the profile slid onto the rear panel can be cut with a PUK
saw so that cables can be led out of the aquarium at the back. The back side should, however, remain
closed to allow the fan to suck in air in the aquarium and not from the outside. To be able to take the
filter tank out of the cabinet, first of all the cabinet's cover plate between the doors has to be removed
(loosen screws).
Xenia 100/130 and 160 have a mechanical refill for evaporated water.
Fig. 4: Floating gauge for refill
Fig. 5: 1. Canister 2. Tap 3. Hose 4. Feedthrough to the filter tank
8