Bil-Jax 4527A Informations opérationnelles et de sécurité - Page 5
Parcourez en ligne ou téléchargez le pdf Informations opérationnelles et de sécurité pour {nom_de_la_catégorie} Bil-Jax 4527A. Bil-Jax 4527A 13 pages. Articulate boom lift
Imprimer la page
F. USAGE RESPONSIBILITIES;
WORK SAFETY; continued ...
MATERIAL SAFETY DATA SHEET - ITEMS;
pages; 59-60). For Hydraulic Oil (Dextron III / Mercon Automatic Transmission Fluid, (see Manufacturer's
"Operator's Manual", page; 61).
Do not operate this equipment when it is exposed to "high winds", "thunderstorms", "ice" or other
WEATHER;
weather conditions that would compromise operator safety. Never operate lift in conditions where wind speeds
exceed 12.5 m/sec (28 mph). Winds at this speed or higher can affect the stability and boom operation.
Always be acutely aware of wind conditions when operating "any type" aerial lift equipment.
G. CONTROLS and THEIR FUNCTIONS;
GROUND CONTROL STATION;
(for further information, see the Manufacturer's
"Operator's Manual", pages; 14-15).
The "Ground Control Station" is used to
operate outriggers and control boom
motion. To access the ground Control
Station, open the control panel access
cover found on the turnable. Turn the
key switch to the Ground Control Setting.
Turning the key switch
1. KEY SWITCH;
to the
PLATFORM (1a)
operation from the platform. Turning
the key switch to the
icon selects operation from the ground
Control panel. The center (power off)
position interrupts all electric and
hydraulic power operations except
emergency lowering. Remove the
key protects against unauthorized
persons. The key may be removed
with the key switch in any selected
position.
2. BATTERY CONDITION INDICATOR;
Indicator
s light up to indicate the
LED
level charge remaining in the batteries.
A lighted green
LED
adequate charge level. Lighted yellow
s indicate the need for charging
LED
soon. A lighted red
battery charge is low; boom operations
should be halted until the batteries are recharged.
3 - 4. ENGINE START and CHOKE;
The display panel is a lighted text window that displays the present operating status or an
5. DISPLAY PANEL;
existing error condition when the key switch is on.
6. EMERGENCY STOP BUTTON;
the "Ground" and "Platform" control stations.
7 - 8. BOOM EXTEND/RETRACT BUTTONS;
button at the same time extends the telescopic boom. Pressing and holding a desired
button at the same time retract the boom. Boom motion continues until the buttons are
BOOM RETRACT
released or until the boom reaches a hard stop or
a safe travel limit.
9 - 14. BOOM RAISE/DOWN BUTTONS;
holding a desired
SPEED
button at the same time will raise the
/ JIB BOOM RAISE
chosen boom. Pressing a desired
the
UPPER/LOWER / JIB BOOM DOWN
same time will lower the chosen boom. Boom motion
continues until the buttons are released or until the
boom reaches a hard stop or a safe travel limit.
15. SPEED BUTTONS;
right side of the control panel must be pressed and held
while selecting a boom function. Four speeds are
available to control positioning of the boom lift.
16 - 17. PLATFORM TILT BUTTONS;
hold any
button and the desired
SPEED
button at the same time to level the work platform
(levels the platform only, not the boom lift).
2015 - BIL-JAX #4725A, "TOWABLE - ARTICULATE BOOM LIFT" - OPERATIONAL & SAFETY INFO
For Lead Acid Batteries, (see Manufacturer's "Operation Manual",
icon selects
(1b)
GROUND
indicates an
s warns the
LED
does not apply to this model unit.
When pushed in, the emergency
Pressing and holding a desired
Pressing and
button and the
UPPER/LOWER
button and
SPEED
button at the
The
buttons along the lower
SPEED
Press and hold and
PLATFORM TILT
(Figure; 3-1) Ground Control Station
button disconnects electrical power to
STOP
button and the
SPEED
SPEED
BOOM EXTEND
button and the
...
page 5 - 12